User's Manual
www.trilithic.com
www.trilithic.com
Page II-25
802 AWE Operation Manual
Advanced Wireless Test Set
LCD Dimming Delay
The LCD Dimming Delay setting is used to
conserve power by automatically dimming the
display screen backlight after the 802 AWE has
been idle for a specied period of time.
The default setting for the LCD dimming delay is 1
Minute. The LCD dimming delay can be set from
a minimum of one (1) minute up to a maximum of
ve (5) minutes.
Use either of the following methods to change the
LCD dimming delay:
• Use the up/down arrow buttons to change
the value in one (1) minute increments.
• Press the Enter button and use the Virtual
Keyboard to directly enter the LCD
dimming delay as shown in the image to the
right.
Upon any button press, the LCD will automatically
brighten and the delay timer will restart.
Whenever the 802 AWE is being powered by the AC to DC
power adapter & battery charger, the LCD dimming delay will
be deactivated automatically.