User's Manual

www.trilithic.com

Page II-62

802 AWE Operation Manual

Advanced Wireless Test Set

Deactivate USB Power

This function is used to deactivate power to the

USB ash drive inserted into the USB port of

the 802 AWE. The USB ash drive should be

deactivated before removing.

Select the Deactivate USB Power button from the

Function menu. The USB ash drive can now be

removed.

The 802 AWE automatically deactivates the power

to the USB ash drive when you exit the File

Explorer screen.

Save Log File

This function is used when experiencing unexpected operation of the 802 AWE.

Save to Internal Memory

This function is used primarily for hands-on factory and repair center troubleshooting.

Perform the following steps to save the 802 AWE log le to the internal memory of the

802 AWE:

1. Select the Save Log button from the

Function menu.

To save a log le, the Operating Level setting must be

set to Logging, see Section II: Setup, Chapter 3: Meter

Conguration, Global Settings.