User's Manual

www.trilithic.com
www.trilithic.com
Page II-52
802 AWE Operation Manual
Advanced Wireless Test Set
Cloning Meter Settings to a New Meter
Perform the following steps to clone all les from one 802 AWE to another:
1. Insert the USB ash drive adapter into the USB
port of the 802 AWE.
2. Insert a USB ash drive into the USB ash
drive adapter.
3. Press the Function button and select the
Activate USB Power function as shown in the
image to the right.
4. The power to the USB ash drive is activated
and the drive is now mounted to the le system
as shown in the image to the right. The 802
AWE is now capable of transferring les to and
from the USB ash drive.