User's Manual

www.trilithic.com
www.trilithic.com
Page II-50
802 AWE Operation Manual
Advanced Wireless Test Set
Database Restore
Restore from Internal Memory
Perform the following steps to restore the 802 AWE database le from the internal memory
of the 802 AWE:
1. Select the Database softkey.
2. From the Database pop-up menu, select
the Restore button as shown in the image
to the right.
3. The entire database will be restored from
the internal memory of the 802 AWE.
7. The Message Bar will indicate a successful
backup to the ash drive by displaying the
text
“-> /media/sda1/main.db” as shown in the
image below.
This function is useful when cloning the device settings
between different meters. When importing the database le
on another meter, all device settings will be updated while
retaining the existing user information.