User's Manual

www.trilithic.com
www.trilithic.com
Page II-49
802 AWE Operation Manual
Advanced Wireless Test Set
Backup to USB Flash Drive
Perform the following steps to backup the 802 AWE database le to a USB ash drive:
1. Insert the USB ash drive adapter into the
USB port of the 802 AWE
2. Then insert a USB ash drive into the USB
ash drive adapter.
3. Press the Function button and select the
Activate USB Power function as shown in
the image to the right.
4. The power to the USB ash drive is
activated and the drive is now mounted to
the le system as shown in the image to
the right. The 802 AWE is now capable of
transferring les to and from the USB ash
drive.
5. Select the Database softkey.
6. From the Database pop-up menu, select
the Backup button as shown in the image
to the right.