User's Manual

www.trilithic.com
www.trilithic.com
Page II-48
802 AWE Operation Manual
Advanced Wireless Test Set
Database Backup
Backup to Internal Memory
Perform the following steps to backup the 802
AWE database le to the internal memory of the
802 AWE:
1. Select the Database softkey.
2. From the Database pop-up menu, select
the Backup button as shown in the image
to the right.
3. The Status Bar will indicate a successful
backup to the internal memory by displaying
the text
“-> /tmp/main.db” as shown in the image
below.
This internal memory is lost on power down and is only used
to clone users on the meter by backing up the database of
one user and restoring the database to another user.
This function is useful when cloning the device settings
between users on the same meter. When importing the
database le under another user, all device settings will be
updated while retaining the existing user information.