User's Manual

www.trilithic.com
www.trilithic.com
Page II-34
802 AWE Operation Manual
Advanced Wireless Test Set
Prompt User
The Prompt User setting is used to prompt a
user with the Network Settings window before
connecting to a network.
The default setting for Prompt User is Yes, use
the left/right arrow buttons to select from the
following preset values:
• Select Yes to prompt the user with
the Network Settings window before
connecting to a network.
• Select No to automatically connect using
the default network settings.
IP Mode
The IP Mode setting is used to set which type of
network connection to establish when logging into
a network.
The default setting for IP mode is IPv4 DHCP,
use the left/right arrow buttons to select from the
following preset values:
• Select IPv4 DHCP to automatically obtain
an IP address from a DHCP server. In
this mode, the network settings cannot be
adjusted and are populated with the text
Automatic.
• Select IPv4 Static to manually enter the
network settings. In this mode, all of the
network settings must be manually adjusted
as shown in the following sections.