User's Manual

www.trilithic.com
www.trilithic.com
Page II-31
802 AWE Operation Manual
Advanced Wireless Test Set
Job & Workorder ID Length
The Job/Workorder ID Length setting is used to
set the maximum number of characters to display
for jobs and workorders on the 802 AWE.
The default setting for the job and workorder ID
length is 6 Characters. The character length can
be set from a minimum of 6 characters up to a
maximum of 32 characters.
Use either of the following methods to change the
maximum number of characters:
• Use the up/down arrow buttons to change
the value in one (1) character increments.
• Press the Enter button and use the Virtual
Keyboard to directly enter the number of
characters as shown in the image to the
right.