User's Manual

www.trilithic.com
www.trilithic.com
Page II-30
802 AWE Operation Manual
Advanced Wireless Test Set
Keypad Rate
The Keypad Rate setting is used to adjust the
keypad rate.
The default setting for the keypad rate is 50
mSeconds. The keypad rate can be set from a
minimum of 50 mSeconds up to a maximum of
1000 mSeconds.
Use either of the following methods to change the
keypad rate:
• Use the up/down arrow buttons to change
the value in 50 mSecond increments.
• Press the Enter button and use the Virtual
Keyboard to directly enter the keypad rate
as shown in the image to the right.