User's Manual

www.trilithic.com
www.trilithic.com
Page II-27
802 AWE Operation Manual
Advanced Wireless Test Set
Turn Off Delay
The Turn Off Delay setting is used to conserve
power by automatically turning off the device after
the 802 AWE has been idle for a specied period
of time.
The default setting for the turn off delay is 1 Hour.
The turn off delay can be set from a minimum of
one (1) hour up to a maximum of 24 hours.
Use either of the following methods to change the
turn off delay:
• Use the up/down arrow buttons to change
the value in one (1) hour increments.
• Press the Enter button and use the Virtual
Keyboard to directly enter the turn off delay
as shown in the image to the right.