User's Manual

www.trilithic.com

Page I-20

802 AWE Operation Manual

Advanced Wireless Test Set

Sleep Mode

The sleep mode is used to conserve power by putting the 802 AWE to sleep when not in

use. This also allows the 802 AWE to be turned back on quickly when moving from one test

location to another throughout the work day

Automatic Sleep Mode

The 802 AWE will automatically enable the sleep mode to conserve power after the 802

AWE has been idle for a specied period of time.

The default setting for the sleep mode delay is 5 Minutes. The sleep mode delay can be

set from a minimum of one (1) minute up to a maximum of 60 minutes.

Manual Sleep Mode

To manually enter the sleep mode, quickly press the Power button.

Wake from Sleep Mode

Quickly Press the Power button to wake the 802 AWE from sleep mode. The sleep

mode delay timer will automatically restart.

For more information about setting the Sleep Mode Delay, see

Section II: Setup, Chapter 3: Meter Conguration, Interface

Settings.

Whenever the 802 AWE is being powered by the AC to DC

power adapter & battery charger, the sleep mode delay will be

deactivated automatically.