User's Manual

www.trilithic.com
www.trilithic.com
Page II-16
802 AWE Operation Manual
Advanced Wireless Test Set
Auto-Start Network
The Auto-Start Network setting is used to
control what network the 802 AWE automatically
connects to when entering the tethered mode
upon startup/login.
It is set to Ethernet and is xed.
Tethering Control
The Direct to Tethered setting is used to control
whether the 802 AWE automatically enters its
tethered mode upon startup/login.
The default setting for Direct to Tethered is No,
use the up/down arrow buttons to select from the
following preset values:
• Select Yes to allow automatic tethering
upon startup/login.
• Select No to disable automatic tethering
upon startup/login.