User's Manual
www.trilithic.com
www.trilithic.com
Page II-15
802 AWE Operation Manual
Advanced Wireless Test Set
Operating Level
The Operator Level setting is used to
control whether the 802 AWE is operating in
its normal mode or in an advanced logging
mode. The logging mode is used for advanced
troubleshooting by Trilithic technical support.
The default setting for Operator Level is Normal,
use the up/down arrow buttons to select from the
following preset values:
• Select Normal for the normal mode of
operation.
• Select Logging for troubleshooting with
Trilithic technical support.
• Select Calibrate to enter the calibration mode.
Multiple User Control
The Multiple Users setting is used to control
whether multiple user proles are displayed when
the 802 AWE is powered on.
The default setting for Multiple Users is Yes,
use the up/down arrow buttons to select from the
following preset values:
• Select Yes to allow multiple user proles.
• Select No to use only one user prole.