User's Manual

www.trilithic.com

Page I-36

802 AWE Operation Manual

Advanced Wireless Test Set

Perform the following steps to connect using the Wi-Fi connection:

1. Select the Wi-Fi connection button from

the Network Manager window as shown in

the image to the right.

Wi-Fi Connection

2. If the Prompt User option is set to Yes

from within the Wi-Fi Settings option

of the Setup menu, the Wi-Fi Settings

window will appear as shown in the image

to the right. Adjust the Wi-Fi settings as

desired and then select the Login button.

3. After approximately 15 seconds the Wi-

Fi adapter will show a list of the available

networks will appear as shown in the

image to the right. Select the desired

network from the list, adjust the Wi-Fi

settings as needed and then select the

If the Prompt User option is set to No from within the Wi-Fi

Settings option of the Setup Menu, the Wi-Fi Settings window

will not appear. If so, proceed to Step 3.