User's Manual

www.trilithic.com
www.trilithic.com
Page I-34
802 AWE Operation Manual
Advanced Wireless Test Set
Perform the following steps to connect using the Ethernet connection:
1. Connect an Ethernet cable to the Ethernet
Port of the 802 AWE.
2. Select the Ethernet connection button
from the Network Manager window as
shown in the image to the right.
Ethernet Connection
3. If the Prompt User option is set to Yes
from within the Ethernet Settings option
of the Setup menu, the Ethernet Settings
window will appear as shown in the image
to the right. Adjust the Ethernet settings as
desired and then select the Login button.
If the Prompt User option is set to No from within the Ethernet
Settings option of the Setup Menu, the Ethernet Settings
window will not appear. If so, proceed to Step 4.