User's Manual

www.trilithic.com
www.trilithic.com
Page IV-31
802 AWE Operation Manual
Advanced Wireless Test Set
Pass/Fail Measurement Indicators
When a limit set has been opened, the network tests will be tested against the current limit set.
When any of the individual measurement parameters of a network tests fail, the network tests
as a whole will indicate a Fail status.
A Pass/Fail status will be displayed next to each measurement parameter. The pass/fail status
of the network tests will be indicated using the following icons:
This icon indicates that this measurement
was skipped. This only applies to
measurements that have been removed
from the currently selected limit set.
This icon indicates that this measurement
is within the measurement thresholds of the
currently selected limit set.
This icon indicates that the measurement
limit set has failed.
This icon indicates that the measurement
has failed the high limit measurement
threshold.
This icon indicates that the measurement
has failed the low limit measurement
threshold.