User's Manual
www.trilithic.com
www.trilithic.com
Page IV-23
802 AWE Operation Manual
Advanced Wireless Test Set
Setting the Destination IP Address
To manually enter the destination IP address for the
network testing, highlight the IP eld as shown in the
image to the right.
After selecting the Done softkey, a conrmation
window will be displayed as shown in the image to the
right. Select the OK button to save the location to your
favorites or select the Cancel button to accept the
changes without saving to your favorites.
Then, press the Enter button and use the Virtual
Keyboard to directly enter the IP address as shown in
the image to the right.