User's Manual

www.trilithic.com
www.trilithic.com
Page III-5
802 AWE Operation Manual
Advanced Wireless Test Set
www.trilithic.com
From within any of the display modes of the Wi-Fi Survey screen;
• Use the up/down arrow buttons on the keypad
to navigate through the list of wireless access
points. The currently selected access point is
highlighted in blue.
• The Message Bar at the bottom of the screen
will display the SSID, channel number, and
power of the currently selected access point.
• Press the Enter key on the keypad to display
the Channel/Device Details screen of the
selected access point, as shown in the image
to the right.
The Wi-Fi Survey screen will be displayed as shown in one of the following images based on
the settings selected by the user the last time the application was used. Each of these screens
allow you to adjust the display settings between the list view, 2.4 GHz graph, and 5 GHz graph.
Wi-Fi Access Point Survey
Chapter 2
Overview
Select the Wi-Fi icon as shown in the image to the
right to perform a Wi-Fi survey of all 2.4 & 5 GHz
802.11 (a/b/g/n/ac) access points within range of the
802 AWE.
List View 2.4/5 GHz Graph