User's Manual

www.trilithic.com
www.trilithic.com
Page IV-13
802 AWE Operation Manual
Advanced Wireless Test Set
• At any given time, the total percentage utilization for the selected channel is the sum of
the individual percentage of utilization components (802.11 and non-802.11). However,
the total percentage of utilization cannot exceed 100%
• For example, in the image to the right
the 802.11 percentage of utilization is
8% and the non-802.11 percentage of
utilization is 7%. So, the total percentage
of utilization for the selected channel is
15%.
• In the case where a channel exceeds
100% total utilization, the graph will
display the full measurement value of
the non-802.11 percentage of utilization
as the noise oor, while the remaining
space on the graph will be occupied by part of the 802.11 percentage of
utilization. In this case, the non-802.11 percentage of utilization acts as a noise
oor that squeezes out the desired 802.11 percentage of utilization.
• For example, the 802.11 percentage of utilization is 74% and the non-
802.11 percentage of utilization is 48%. So, the total percentage of
utilization is actually 122%, which exceeds the maximum percentage of
utilization (100%).
• In this example, the full percentage of utilization for non-802.11 signals
(48%) is displayed at the bottom of the graph and the remaining space on
the graph will be lled with the 802.11 percentage of utilization (52%).
• The remaining 802.11 percentage of utilization (22%) is squeezed out
of the graph by the non-802.11 percentage of utilization and will not be
displayed.