User's Manual

www.trilithic.com

Page IV-6

802 AWE Operation Manual

Advanced Wireless Test Set

From within any of the display modes or graph views of the Channel Usage screen;

• The currently selected channel is highlighted in

magenta and can be adjusted by:

• Using the up/down arrow buttons on the

keypad

• Pressing the Enter key on the keypad

and entering the channel number using

the Virtual Keyboard as shown in the

imageto the right.

• The center frequency of the selected channel

and number of access points currently using

that channel are displayed to the right of the

channel number as shown in the image to the

right.

• The following usage measurements for the

selected channel are displayed within the main

display area:

• Ch Usage – This displays the real-time

total percentage of utilization from both

802.11 and non-802.11 sources.

• Non-802.11 Events – This displays

the real-time number of events for non-

802.11 sources only.

• Non-802.11 Usage – This displays the

real-time percentage of utilization for

non-802.11 sources only.

• 802.11 Events – This displays the

real-time number of events for 802.11

sources only.

• 802.11 Usage – This displays the real-

time percentage of utilization for 802.11

sources only.

• Select the Mode softkey to toggle the display mode between 2.4 GHz and 5 GHz

channels.