User's Manual

www.trilithic.com
www.trilithic.com
Page III-20
802 AWE Operation Manual
Advanced Wireless Test Set
• The measurement samples continuously move from the right side of the
graph toward the left hand side of the graph.
• The newest measurement sample is displayed at the far right side of the
screen.
• The oldest measurement sample is displayed at the far left side of the
screen.
• The graph can display 70 measurement samples over a time period of
approximately 45 seconds as shown in the image above.
4. Select the Clients or Access Points softkeys to open the Select a Device screen
as shown in the following images.
• Use the up/down arrow buttons on the keypad to navigate through the list
of wireless clients or access points. The currently selected access point is
highlighted in blue.
• Press the Enter key on the keypad to select the highlighted client or access
point and return to the Device Finder screen.
Clients List Access Points List