User's Manual

www.trilithic.com

Page III-14

802 AWE Operation Manual

Advanced Wireless Test Set

5 GHz Graph Display Mode

This display mode shows all access points using the 5 GHz frequency band within range of the

802 AWE in the form of a wireless channel level graph.

• Use the up/down arrow buttons on the keypad

to scroll through the wireless access points.

• The vertical axis (up/down) of the graph

represents the signal level of the access points

within the 5 GHz frequency band. The graph

displays a maximum level of -20 dBm (top of

graph) and minimum level of -80 dBm (bottom

of graph).

• The horizontal axis (left/right) of the graph

represents the individual channels within the 5

GHz frequency band.

• Select the Settings softkey to toggle the SSID

labels on and off as shown as described below:

• In the above-right image, all labels are

turned on.

• In the image to the right, all labels are

turned off.

• Select the Band softkey to toggle between

the three different wireless channel frequency

bands shown below.

Channels 36 to 64 Channels 100 to 144 Channels 149 to 165