User's Manual

www.trilithic.com

Page III-13

802 AWE Operation Manual

Advanced Wireless Test Set

2.4 GHz Graph Display Mode

This display mode shows all access points using the 2.4 GHz frequency band within range of

the 802 AWE in the form of a wireless channel level graph.

• Use the up/down arrow buttons on the keypad

to scroll through the wireless access points.

• The vertical axis (up/down) of the graph

represents the signal level of the access points

within the 2.4 GHz frequency band. The graph

displays a maximum level of -20 dBm (top of

graph) and minimum level of -80 dBm (bottom

of graph).

• The horizontal axis (left/right) of the graph

represents the individual channels within the

2.4 GHz frequency band.

• Select the Settings softkey to toggle the SSID

and Zigbee channel labels as described below:

• In the above-right image, all labels are

turned on.

• In the image to the right, all labels are

turned off.

• In the below-left image, the SSID labels

have been turned on.

• In the below-right image, the ZigBee

Channel labels have been turned on.