User's Manual

www.trilithic.com

Page III-10

802 AWE Operation Manual

Advanced Wireless Test Set

• The horizontal axis (left/right) of the

graph represents the number of

measurement samples taken from

when you rst entered the Device

Finder screen.

• The measurement samples

continuously move from the

right hand side of the graph

toward the left hand side of

the graph.

• The newest measurement

sample is displayed at the far right hand side of the screen.

• The oldest measurement sample is displayed at the far left hand side

of the screen.

• The graph can display 70 measurement samples over a time period of

approximately 45 seconds as shown in the image above.

4. Select the Clients or Access Points softkeys to open the Select a Device screen

as shown in the following images.

• Use the up/down arrow buttons on the keypad to navigate through the list

of wireless clients or access points. The currently selected access point is

highlighted in blue.

• Press the Enter key on the keypad to select the highlighted client or access

point and return to the Device Finder screen.

Clients List Access Points List