User's Manual

www.trilithic.com

Page III-9

802 AWE Operation Manual

Advanced Wireless Test Set

3. The Device Finder screen will be displayed

as shown in the image to the right.

• This screen displays the following

information about the selected

device:

• MAC – Device MAC Address

• SSID – Access Point Name

• Power – Signal Power Level

• CH – Wireless Channel

• The internal speaker of the 802 AWE will emit an audible beeping sound

when trying to locate devices.

• As the user moves closer to the device they are trying to nd, the

beeping becomes more frequent and increases in tone.

• When the user moves away from the device, the beeping becomes

less frequent and decreases in tone.

• Select the Mute softkey to disable the beeping sound or select the

Unmute softkey to enable the beeping sound.

• The vertical axis (up/down) of the graph represents the signal level of the

selected device. The graph displays a maximum level of -30 dBm (top of

graph) and minimum level of -90 dBm (bottom of graph).

Finding Devices

Perform the following steps to nd the selected device:

1. Use the up/down arrow buttons on the

keypad to scroll through the wireless access

points. The currently selected access point

is highlighted in blue as shown in the image

to the right.

2. Select the Find softkey.