User's Manual

www.trilithic.com
www.trilithic.com
Page III-8
802 AWE Operation Manual
Advanced Wireless Test Set
Access Point Properties
Signal Level
The column labeled dBm within the table displays the signal level measurement in dB
from a minimum of -100 dBm to a maximum of 0 dBm.
Access Point Name
The column labeled SSID within the table displays the name of the access point.
Security Status
The column labeled SEC within the table displays the security status of the access point
as follows:
When this icon is displayed, it indicates that the access point is using either
WEP, WPA, or WPA2 security.
When this icon is displayed, it indicates that the access point is not using either
WEP, WPA, or WPA2 security.
Wireless Frequencies
The column labeled 802.11 within the table displays the wireless frequencies of the
access point as follows:
When this icon is displayed, it indicates that the access point is using 802.11a
wireless within the 5 GHz frequency spectrum.
When this icon is displayed, it indicates that the access point is using 802.11b
wireless within the 2.4 GHz frequency spectrum.
When this icon is displayed, it indicates that the access point is using 802.11g
wireless within the 2.4 GHz frequency spectrum.
When this icon is displayed, it indicates that the access point is using 802.11n
wireless within the 2.4 GHz & 5 GHz frequency spectrums.
When this icon is displayed, it indicates that the access point is using 802.11ac
wireless within the 5 GHz frequency spectrum.
Wireless Channel
The column labeled CH within the table displays the wireless channel of the access
point.