User's Manual

Redpine Signals, Inc. Proprietary and Confidential
Page 9
RS9110-N-11-
03 Evaluation Board
R
S91 1 0 -N-1 1 -0 3 Eval u ati on B o ard
User Guide
Us e r Gu i d e
Version 1.5
Ver s i o n 1.5
Deliverable
Description
L
inux platform:

11g connection with WPA/WPA2

11n connection with WPA2

11n connection with Aggregation
.5: Evaluation Process on Linux
You can start the evaluation process as follows:
Step 1: -
Follow the instructions mentioned in the
LiteFi_Driver_Installation_Gu
ide_Linux.pdf.
Step 2: -
Follow the instructions mentioned in the
RS9110_N_11_03_WLAN_Test_Procedure_Linux.pdf
.
.6: Evaluation Software –
Windows CE
The following table provides the description of the software package and
installation guides to be us
ed for carrying out the WLAN data transfer tests
u
sing an Access Point, on a Linux platform.
Deliverable
Description
RWLPSDIO_arm_X_Y_Z.cab 8This is an installation setup file for a Windows
CE or Windows Mobile based ARM platform.
<X_Y_Z> indicates the driver version. For
example, RWLPSDIO_arm_2_1_3.cab, means
2.1.3 version of the Windows CE driver.
LiteFi_Driver_Installation_G
uide_WindowsCE.pdf
This is a user guide which provides
instructions on following topics:

Copying the setup file

Host requirements to install the Wi-
Fi
driver

Installation of the Wi-
Fi driver
RS9110_N_11_03_WLAN_T
est_Procedure_WindowsCE.
pdf
This is a user guide on the usage of the driver
and wireless configuration utility to do data
transfer tests under following categories in
W indows CE platform such as HP-
iPAQ PDA:

11g connection –
Open System

11g connection with WPA

11n connection with WPA