User's Manual

Redpine Signals, Inc. Proprietary and Confidential
Page 7
RS9110-N-11-
03 Evaluation Board
R
S91 1 0 -N-1 1 -0 3 Eval u ati on B o ard
User Guide
Us e r Gu i d e
Version 1.5
Ver s i o n 1.5
Please note that, in order to evaluate the Lite-
Fi™ on a Windows CE or a
W
indows Mobile platform, you need to replace the Laptop in the following
setup, with any of the Windows CE or Windows Mobile based SDIO platform.
Laptop
with SDIO slot
8 0 2 . 1 1 n
Access Point
RS9110-N-11-03
EVB
SDIO
Ethernet
LAN
Figure 3: Test Setup for Throughput Measurement
The followin
g is the list of the test setup requirements:

L
aptop with SDIO slot and Windows XP or Linux operating system, or a
W
indows CE or Windows Mobile based SDIO platform.

RS9110-N-11-
03 EVB

8
02.11n Access Point
.2: Evaluation Software –
Windows XP
The following table provides the description of the software package and
installation guides to be used for carrying out the WLAN data transfer tests
u
sing an Access Point, on a Windows XP platform.
Deliverable
Description
L
iteFi_X_Y_Z.exe
This is an installation setup file based on
Windows XP, which will install the Wi-
Fi driver
files into “C:\Program Files\Lite-
Fi”. <X_Y_Z>
indicates the driver version. For example,
LiteFi_2_1_3.exe, means 2.
1.3 version of the
W
indows XP driver.
LiteFi_Driver_Installation_
Guide_WindowsXP.pdf
This is a user guide which provides instructions
on following topics: