User's Manual

47
Seeker & Seeker MCA III Operation Manual
Data Synchronization
When a user does not have a Wi-Fi or cellular connection available to upload recorded data
from the MCA III to the central server, the user may synchronize the data of the MCA II with
the internal memory of the Seeker.
To synchronize the data between the MCA III and the Seeker, press
and hold the Snapshot button. While the MCA III is transferring
data to the Seeker, the Seeker will display the following screen:
When the MCA III is done transferring data to the Seeker, the
Seeker will display the screen to the right. Press any button to
return to the Measurement display.
The bar graph will show the progress of the data
synchronization, do not remove the Seeker from the Mobile
Mount until the data synchronization is completed, otherwise
data corruption will occur.
This mode will only work when the Seeker is in the Mobile
Mount. The Snapshot button is used to record the pre x and
post x leakage information recorded by the Seeker when the
Seeker is not in the Mobile Mount. For more information, see
Chapter 3: Seeker Operation, Snapshot Modes.