User's Manual

DRAFT
EASyCAP Encoder/Decoder - Manual
26
Alert Text Settings
To setup the alert text settings for the Encoder/Decoder, select the Alert Text link. The Alert Text
setup page will be displayed as shown below.
The Alert Text setup page is used to configure which additional elements are included in the alert
text. Select the Edit button to change the alert text settings, and then select from the following
check boxes.
 Include FCC text - When this box is selected, the EAS Header Translation will be
included in the alert text. This box should always be selected unless the FCC agrees to
drop the requirement for this text to be sent. If the FCC does indeed drop this requirement,
Trilithic recommends that this box should not be selected.
 Include <headline> - When this box is selected, the CAP Headline will be included in the
alert text. Trilithic recommends that this box should not be selected.
 Include <areaDesc> - When this box is selected, the CAP Area Description will be
included in the alert text. Trilithic recommends that this box should not be selected.
After making changes, select the Save button to save the alert text settings.