User's Manual
Table Of Contents
DRAFT
EASyCAP Encoder/Decoder - Manual
24
CAP Settings
To setup the CAP feeds to the Encoder/Decoder, select the plus (+) sign to the left of CAP Feeds,
and then select the TCP Feed link. The TCP Feed setup page will be displayed as shown below.
There are two ways to display the CAP Feeds that are currently configured, choose from either of
the following methods:
Select the Previous or Next buttons to scroll through the CAP
Feeds, the settings of the selected CAP Feed will automatically be
displayed.
Select the Choose button to view a list of the CAP Feeds. Select
the name of the CAP Feed and then select the OK button to view
its configuration.