User's Manual

DRAFT
EASyCAP Encoder/Decoder - Manual
23
Date/Time Settings
To adjust the Date/Time settings of the Encoder/Decoder, select the Date/Time link. The Date/
Time setup page will be displayed as shown below.
Select the Edit button to change the Date/Time settings, and then adjust any of the following
settings:
 Month - Select the current month from the dropdown list.
 Day of Month - Select the current day from the dropdown list.
 Year - Select the current year from the dropdown list.
 Hour - Select the current hour from the dropdown list.
 Minute - Select the current minute from the dropdown list.
 Time Zone - Select the time zone from the dropdown list.
After making changes, select the Save button to save the Date/Time settings.
During initial configuration time and date should be set
manually. Afterwards, if an NTP Encoder/Decoder is configured
the Date/Time will automatically synchronize with the NTP
Encoder/Decoder.