User's Manual

DRAFT
EASyCAP Encoder/Decoder - Manual
22
Select the Edit button and then enter the URL or IP Address of the NTP Encoder/Decoder to
connect to. After making changes, select the Save button to save the NTP Encoder/Decoder
settings.
During initial configuration time and date should be set
manually. Afterwards, if an NTP Encoder/Decoder is configured
the Date/Time will automatically synchronize with the NTP
Encoder/Decoder.
DNS 1 & DNS 2
The following Domain Name Encoder/Decoder (DNS) settings can be adjusted:
 DNS 1 - Enter the primary DNS Encoder/Decoder address in this field.
 DNS 2 - Enter the secondary DNS Encoder/Decoder address in this field.
After making changes, select the Save button to save the network settings. If the IP Address of
the Encoder/Decoder has changed, you will need to close the browser window and reopen to
login to the Encoder/Decoder at the new IP Address.
Network Time Protocol (NTP) Encoder/Decoder
To setup a Network Time Protocol connection to the Encoder/Decoder, select the plus (+) sign
to the left of Network, and then select the NTP link. The NTP setup page will be displayed as
shown below.