User's Manual
Table Of Contents
- 1. General Information
- Helpful Website
- Where to Get Technical Support
- How this Manual is Organized
- Conventions Used in this Manual
- Precautions
- What is the 360?
- Overview
- The Standardization Solution
- Next Gen Features
- Comprehensive Testing
- Total Home Certification Management
- Auto Test Apps
- Justify ROI
- Testing Features
- Additional Functions
- Equipment Supplied with the 360 DSP
- A Guided Tour of the 360 DSP
- Front View
- Rear View
- Top View
- Bottom View
- 2. Wi-Fi Setup
- Wi-Fi Setup Procedure
- 3. Wi-Fi Operation
- Enable Wi-Fi
- Disable Wi-Fi
- Wi-Fi Survey Mode
- 4. Specifications
360 DSP - Operation Manual, Wi-Fi Option
17
This chapter:
Describes the setup of the Wi-Fi Option
Wi-Fi Setup Procedure
Perform the following steps to setup the optional Wi-Fi:
1. Power on the 360 DSP by pressing the Power
button.
2. The Welcome screen will appear as shown in
the image to the right.
3. Use the touchscreen to select the user profile
that you would like to use.
4. By default, the Autotest navigation menu will
appear as shown in the image to the right.
5. Use the touchscreen to select the Setup softkey
at the bottom of the screen.
6. The Setup navigation menu will apper, use the
touchscreen to select the Setup icon as shown
in the image to the right.
2. Wi-Fi Setup
Chapter 2