Replacement Part List

SAW CHAIN BASICS
PITCH is determined by measuring the
distance between the centers of any three
consecutive rivets and dividing by two.
GAUGE of a chain is the thickness
of the drive link measured at the tang.
It’s essential that the drive link thickness
correctly matches the width of the groove in
the guide bar.
KERF is the width of the cut in the wood
made by the saw chain cutter. Optimum kerf
for a saw chain is dependent on the chain
saw’s horsepower, saw chain speed, length
of the guide bar and the size, hardness and
type of timber being cut. TriLink
®
saw chain
is available with the ideal kerf for every
combination of equipment and timber.
÷
2
PITCH GAUGE KERF
04