Installation Guide


Adapting To Different Types of Gas
Before carrying out any maintenance work,disconnect the appliance from the gas and
electric supply.
To change the nozzles of burners use the following procedure:
Lift up the burners and unscrew the nozzles using an adjustable spanner of 7mm and
change the nozzles(Picture “J”) with those designed for the new gas supply according to
the information shown below.
ATTENTION:After carrying out the changes described above,the technician must put
the card corresponding to the new gas supply on the appliance to take the place.this
card is found in the bag containing spare nozzles.
Burner
Type of Gas
Pressure/mbar
Nozzle Diameter
1/100mm
Auxiliary
Natural 20
20
85
Butane 30
30
53
Semi-Rapid
Natural 20
20
110
Butane 30
30
69
Rapid
Natural 20
20
145
Butane 30
30
90
Triple-ring
Natural 20
20
170
Butane 30
30
109

Matters Needing Attention
A. Before installation,along the inside of the four edges of the cooktop, paste sponge
strips to buffer the friction between the cooktop and the cabinet panel.
B. Ignition:If there is no electric current you can light the burners with matches.
C. When cooking food with oil or fat which can easily set alight,the user must not
leave the cooktop.Do not use sprays near the cooktop when it is in use.When using the
burners make sure that the pan handles are in the correct position.
D. Keep children away.
E. Before carrying out any cleaning operation disconnect the cooktop from the
electric mains and turn off the main tap which supplies the cooktop with gas.
F. Choose the right pan size:
G. Choose flat pan:
H. Cleaning the worktop:periodically the burner heads,enameled steel
grills,enameled lids and flame dividers must be cleaned with warm soapy water,rinsed
and dried well.
I. Any liquid which overflows from the pan must always be removed with a cloth.
J. If opening or closing any tap is difficult do not force if but ask for an urgent check
from the technical assistant.
Recommended Pan Diameters
BURNER
PAN DIAMETERS Recommended(cm.)
Auxiliary
12-14
Semi-Rapid
14-26
Rapid
18-26
Triple-ring
22-26