Use and Care Manual

12
Fig 12-A
Ready for use
Normal mode
The Occupancy Sensor is now ready for use. In Normal mode, the connection between the sensor and
the thermostat is set up. The sensor will automatically update the Connection Status, Room
Temperature, Occupancy State and Sensor Battery Level in the Tricklestar Portal and Tricklestar App.
You can enable or disable the sensor detection LED operation in Normal mode through the TrickleStar
Portal Sensor settings (Occupancy Detection LED Enabled). This option also disables the sensor
detection LED by default, where the sensor LED will not blink when it detects a movement. If the LED
is enabled it will blink once when there is movement detected within 30 second interval.