Daim Ntawv Qhia Tus Neeg Siv

Page 2
5. Attach the Temperature Sensor to the cold water inlet. If you have purchased a Flood Sensor (sold separately), then attach it about 1/8 in. above the
surface of the drain pan. Connect the Temperature Sensor and Flood Sensor to either terminals of sensor 1 or sensor 2 on the Water Heater Controller.
6. If you have a CTA-2045-B communication port adapter, connect it to CTA-2045-B terminal on your Water Heater Controller.
CTA-2045-Bsensor 1 sensor 2
Temperature
Sensor
Cable ties
Cold water inlet
CTA-2045-Bsensor 1 sensor 2
After you have completed the installation, be sure to create a Portal account.
Step 1
Create a Portal account using the QR
code or through the website:
portal.tricklestar.com
Then, log in to the Portal.
+
Step 2
Add your device and follow the instruction
guide to connect your device to Wi-Fi.
Step 4
If contractor account is used for
configuration, transfer ownership to home
owner.
Step 5
Add the TrickleStar App on
homeowner’s smartphone. (Optional)
Step 3
Select your settings for the TrickleStar
Water Heater Controller. (Optional)
+
+