Daim Ntawv Qhia Tus Neeg Siv

ManualsBrandsTrickleStar ManualsOtherTrickleStar TS 2301 Dej rhaub Controller

Water Heater Controller Features

Installing Water Heater Controller

connectivity indicator

load indicator

power button

sensor 1 terminal

sensor 2 terminal

CTA-2045-B terminal

4. Install wiring on the Water Heater Controller.

LED Indicators

The LED indicators provide the following information:

Indicators Status Information

connectivity Does not light up There is no power to the Water Heater Controller.

Lights up in green The Water Heater Controller is connected to Wi-Fi but there is no demand response activity.

Lights up in blue The Water Heater Controller is connected to Wi-Fi and there is demand response activity.

Flashes in green The Water Heater Controller has not been connected to Wi-Fi via the Portal or there is a

connectivity error

load Does not light up The load is off; there is no power to your water heater.

Lights up in red The load is on; power is supplied to your Water Heater.

Flashes in red An error has been detected, and the load is off as a protective measure.

1. Turn off the power for your electric water heater either at the Circuit

Breaker or at the Main Switch.

2. Turn off the incoming water supply at the shut off valve for your water

heater.

3. Unscrew the electrical cover plate from the water heater.

It is easy to install and set up the Water Heater Controller. For details on the installation, refer to the online Installation

Guide:

www.tricklestar.com/Resources/TS2301-Wi-Fi-Electric-Water-Heater-Controller-

Installation-Guide.pdf

Page 1

Summary of content (4 pages)

PAGE 1
Water Heater Controller Features connectivity indicator load indicator power button sensor 1 terminal sensor 2 terminal CTA-2045-B terminal LED Indicators The LED indicators provide the following information: Indicators Status Information connectivity Does not light up There is no power to the Water Heater Controller. Lights up in green The Water Heater Controller is connected to Wi-Fi but there is no demand response activity.
PAGE 2
5. Attach the Temperature Sensor to the cold water inlet. If you have purchased a Flood Sensor (sold separately), then attach it about 1/8 in. above the surface of the drain pan. Connect the Temperature Sensor and Flood Sensor to either terminals of sensor 1 or sensor 2 on the Water Heater Controller. Cold water inlet sensor 1 sensor 2 CTA-2045-B Temperature Sensor Cable ties 6. If you have a CTA-2045-B communication port adapter, connect it to CTA-2045-B terminal on your Water Heater Controller.
PAGE 3
Connecting Your Water Heater Controller to Wi-Fi via the Portal 1. Log in to your TrickleStar Portal account. 2. Select Devices and click “Add New +”. Then, select Wi-Fi Water Heater Controller 3. Follow the instruction guide to connect your Water Heater Controller to Wi-Fi via the Portal John 4. When you have connected your Water Heater Controller to Wi-Fi via the TrickleStar Portal, your Water Heater Controller is ready to use.
PAGE 4
TrickleStar Portal (portal.tricklestar.com) On the Devices page, you can use the icons under Actions to change the settings for your device. Portal Icons Description Functions Control Turn on/off the Boost and Mode function and view the power consumption (W). Energy Monitor daily/weekly/monthly energy usage. Schedules Show your daily/weekly schedule and to add/edit/delete a scheduled event. Settings Advanced settings for your Water Heater Controller. .