/N IMPORTANT SAFETY INFORMATION This information is provided in the interest of safety. You rust read it carefully before installing or using the appliance, Installation o Any electrical work required 10 install the appliance Faust be carried out by a competent qualified person. o Do not use a two-way adapter or extension lead. The dryer must be connected to its own socket. e Ensure the appliance does not stand on the electrical supply cable.
CONTENTS FOR THE USER Page Important Safety Information . Installation Child Safety During Use Service Description of the Appliance Temperature Button Time Defector Dial Programmer Chart ON/OFF Indicator Light Programmer Chart Hints & Tips on Drying Operating Sequence Loading the Laundry Selecting the programmer When drying is complete Maintenance and Cleaning External Cleaning Cleaning the Lint Filter Cleaning the Door Cleaning the Condenser Something Not Working...
DESCRIPTION OF THE APPLIANCE Container Full it Water Container (behind pull-down flap) Condenser Temperature Button Depress the button for the high temperature. Press the button again 1o release it for the low temperature. Use the high temperature for drying cottons and lines, and the low temperature for drying synthetics and delicate, Time Selector Dial The time selector dial is marked in minus up 10 a maximum of 120 minutes. Fo select a drying time.
PROGRAMMER GUIDE Cotton and Polyester Cotton Synthetics Degree of Quantity | Selector Dial Degree of Quantity | Selector Dial Spin Given Setting Spin Given Setting S500rpm 120 ring, Pissoir 60 mind $00/1000rpm 5.0kg 116 mind 800/1000rpm 2.0kg 50 mind Store | 2800 rpm (spin dryer) 80 mind Sterne | 2800 rpm (spin dryer) A0 mind Dry | s00rpm 100 mind Bry | some 40 mind SO0/1000pm 2.0kg #0 mind RO/ L000rpm 1.
OPERATING SEQUENCE 1. Loading the laundry s Open the door by pulling it outwards o Load the items one at a time, shaking them out loosely. + Where possible mix the lead, i.e. Sarge and small items. « Close the door. s Dry your hands and plug in the appliance, 2, Selecting the programmer » Select the temperature = Select the required drying time @ Use the programmer guide 1o help you select the correct drying time and temperature, [f] The machine will now start working.
MAINTENANCE AND CLEANING Disconnect the appliance from the electricity supply before carrying out any maintenance or cleaning. A Never use abrasive cleaning products or cleaning agents which contain bleach, acetone, alcohol or mentholated spirits. Remove and empty water container. External Cleaning Periodically wipe the outside of the appliance, using only water and a soft cloth. Dry thoroughly. Cleaning the Lint Filter Your dryer will only function well if the filter is clean.
SOMETHING NOT WORKING Before contacting your local Trinity Bendix Service Force please carry out the following checks, SYMPTOM SOLUTION 4 The machine does ot work Check that there is a supply of electricity Check the plug fuse Check the door is closed Check the machine is switched on Check the time selector dial is set correctly Check that the condenser and water container are pushed fully back into the machine # The clothes are not dry after normal drying time -> Check you have used the correct temperature
SERVICE AND SPARE PARTS TR In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Trinity Bendix Service Force Irenic by telephoning: 0870 5 929 929 Your telephone call wilt be automatically transferred fo your local Service Center, The addresses can be found on the pages headed Trinity Bendix. Service Force Centers.
GUARANTEE CONDITIONS Standard guarantee conditions We, Trinity Bendix, undertake that if within 12 months of the date of the purchase this Trinity Bendix appliance or any part thereof is proved 1o be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for fab our, materials or carriage on condition that: . The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. .
INSTALLATION INSTRUCTIONS Technical Information Dimensions: Height 85 cm Width 59.5 em Depth 58 em Maximum Dry Weight Loads: Canton Skg ‘Easy care’ polymerization Skg (for minimum creasing) 2kg Delicate 2kg Electrical Ratings Voltage 220-240v Frequency 50Hz Power rating 2700w POSITIONING Site Preparation . The installation surface must be clean and dry. . Do not install on & deep pile carpet. . Do not install the appliance where the temperature may fall below freezing or rise above 35°C. .
CONNECTION AN\ Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING THIS APPLIANCE MUST BE EARTHED Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located on the back panel of your tumble dryer. CHANGING A FUSE Your tumble dryer will be fined with one of two plugs.
ADDITIONAL Door Reversal Your dryer has a reversible door. To change the direction of the opening.
Trinity Bendix, P.O. Box 47, New bury, Berkshire, REORG 5XL Consumer care telephone number... (01635) 525542 MODEL NO. PART NO.
