/N IMPORTANT SAFETY INFORMATION This information is provided in the interest of safety. You must read it carefully before installing or using the appliance. Installation o Do not dry items that have been in contact with flammable chemicals such as dry clean id. « Any electrical work required to install the appliance must chemicals such as dry cleaning flew be carried out by a competent qualified person. ® Never switch the tumble dryer off and leave a hot load in the drum.
CONTENTS FOR THE USER Page Important Safety Installation Child Safety During Use Service Description of the Temperature Button Anti-Crease Button Time Defector Dial Programmer Chart ON/OFF Indicator Light Programmer Chart Hints & Tips on Drying Operating Sequence Loading the Landry Selecting the programmer When drying is complete Maintenance and External Cleaning Cleaning the Lint Filter Something Not Symptoms and Solutions Service and Spare Customer Care...
DESCRIPTION OF THE APPLIANCE Anti-crease Button . Temperature Button On/Off Indicator Light Time Selector Dial Temperature Button Depress the button for the high temperature. Press the button again to release it for the low temperature. Use the high temperature for dyeing cottons and linens, and the Jow temperature for drying synthetics and delicate.
PROGRAMMER GUIDE Maximum goad for Cottons and Linens 5 kg Maximum Joan for Synthetics and Delicate 2 kg For Synthetics, use a half heat setting for 25 45 minutes For Polyester Cottons, use 1 half heat setting for 40 70 minutes For Cotton Dry, use a full heat setting for 70 100 minutes For Cotton Damn Dry, use a full heat setting for 55 80 minutes For Linens, use a full heat setting for 70 100 minutes HINTS & TIPS ON DRYING Before placing articles of laundry in your tumble driver, check the care labels to en
OPERATING SEQUENCE 1. Loading the laundry « Open the door by pulling it outwards e Load the items one at a tine, shaking them out loosely. » Where possible mix the load, i.c. Sarge and small items. « Close the door. « Dry your hands and plug in the appliance. 2. Selecting the programmer o Select the temperature » Select the required drying time @ Use the programmer guide to help you select the correct drying time and temperature. o Select the Anti-crease option if required.
MAINTENANCE AND CLEANING A\ Disconnect the appliance from the electricity supply prefabbed carrying out any maintenance or cleaning. Never use abrasive cleaning products or cleaning agents which contain bleach, acetone, alcohol or mentholated spirits. External Cleaning Periodically wipe the outside of the appliance, using only water and a soft cloth, Dry thoroughly. Cleaning the Lint Filter Your dryer will only function well if the filter is clean.
SOMETHING NOT WORKING Before contacting your local Trinity Bendix Service Force please carry out the following checks.
SERVICE AND SPARE PARTS | In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Trinity Bendix Service Force Center by telephoning: 0870 5929929 Your telephone call will be automatically transferred to your local Service Center.
GUARANTEE CONDITIONS Standard guarantee conditions We, Trinity Bendix, undertake that if within 12 months of the date of the purchase this Trinity Bendix appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labor, materials or carriage on condition that: . The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. .
ELECTRICAL CONNECTION AN\ Aay electrical work required to instill this appliance should be carried vut by & qualified electrician or competent person. WARNING THIS APPLIANCE MUST BE EARTHED Before switching on make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located on the back panel of your tumble dryer. CHANGING A FUSE Your umbel dryer will be fitted with one of two plugs.
POSITIONING Site Preparation . The installation surface must be clean and dry. . Do not install on a deep pile carpet. . Do not install the appliance where the temperature may fall below freezing or rise above 35°C, . Do not use a two way electrical adapter or extension deaf. The dryer must be connected to its own socket. . Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
—— SN CITY BENDIX (CTR D) R, \\ Trinity Bendix, P.O. Box 47, New bury, Berkshire, REORG 5XL Consumer care telephone number... {(01635) 525542 MODEL NO. PART NO.
