User manual

20
How to clean the oven door seal
A rubber seal around the oven opening guarantees
correct operation.
Check the condition of this seal
periodically. If it has to be cleaned, do
not use abrasive objects or
substances.
If you notice that the seal is damaged,
contact your local service centre and
do not use the oven until it has been
repaired.
The internal pane of glass must be put back into the
right seats as shown in Fig. 8.
After the panes of glass have been reassembled in
the oven door, perform the procedure described in
point 8) in reverse to ensure they are locked.
DO NOT clean the oven door while the
glass panels are warm. If this
precaution is not observed the glass
panel may shatter.
If the door glass panel becomes
chipped or has deep scratches, the
glass will be weakened and must be
replaced to prevent the possibility of
the panel shattering. Contact your
local Service Force Centre who will
be pleased to advise further.
Models in stainless steel or aluminium:
It is advisable to clean the oven door and
control panel in stainless steel or aluminium
only with a moist sponge, carefully drying
with a soft cloth after cleaning. Never use
steel wool, acids or abrasive products as
they can damage the surface.
Fig. 8