User manual

21
Shelf Supports
The shelf supports can be removed for easy
cleaning.
Make sure that the appliance is completely
cooled before carrying out this operation.
Proceed as follows:
1. remove the front screw while keeping the shelf
support in position with the other hand (see
diagram 1);
2. keep the shelf support in position and lift them
with a hand while disengaging the rear hook.
Take off the shelf support (see diagram 2);
3. once the cleaning is carried out, mount the
shelf supports following the procedure in
reverse.
Please, ensure the retaining nuts are secure when
refitting the shelf supports.
1
2
Replacing The Oven Light
Disconnect the appliance
If the oven bulb needs replacing, it must comply
with the following specifications:
- Electric power: 15 W/25 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service
Force Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the
electrical supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the
new one.
4. Refit the glass cover and restore the electrical
supply.