User manual

20
How to clean the oven door seal
A rubber seal around the oven opening guarantees
correct operation.
Check the condition of this seal
periodically. If it has to be cleaned, do
not use abrasive objects or
substances.
If you notice that the seal is damaged,
contact your local service centre and
do not use the oven until it has been
repaired.
The internal pane of glass must be put back into the
right seats as shown in Fig. 8.
After the panes of glass have been reassembled in
the oven door, perform the procedure described in
point 8) in reverse to ensure they are locked.
Do not clean the oven door when it is still
hot, as the glass could shatter. If scratches
or deep cracks are noted on the surface
of the glass, contact the authorised
Assistance Centre for replacing the glass.
Models in stainless steel or
aluminium: It is advisable to clean the
oven door and control panel in stainless
steel or aluminium only with a moist sponge,
carefully drying with a soft cloth after
cleaning. Never use steel wool, acids or
abrasive products as they can damage
the surface.
Fig. 8