User manual

7
Switching off the child safety device
3 The child safety device can only be
switched on and off, if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in
this way for a single cooking session; it remains
activated afterwards.
3 After overriding the child safety device, a
heat setting or a function must be set with-
in approx. 10seconds, otherwise the ap-
pliance automatically switches itself off.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking sur-
face automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and the
cooking surface switches off automatically.
• If all cooking zones are switched off, the
cooking surface automatically switches itself
off after approx. 10 seconds.
Step Control panel Display/Signal
1. Switch on appliance (Do not set a heat setting).
2. Touch of both the cooking zones at the front
simultaneously for 4 seconds.
3. Switch appliance off.
The child safety device is switched off.
Step Control panel Display/Signal
1. Switch appliance on
2. Touch of both the cooking zones at the front
simultaneously for 4 seconds.
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.