User information Ceramic hob TBC 651 X
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance.
Operating Instructions 1 Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. Correct use • Persons (including children) who, due to their physical, sensory or mental capacity or their inexperience or lack of knowledge are unable to use the appliance safely should not operate this appliance without the supervision or instruction of a responsible person. • Do not leave the appliance unattended during operation.
How to avoid damage to the appliance • The ceramic glass can be damaged by objects falling onto it. • The edge of the ceramic glass can be damaged by being knocked by the cookware. • Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the ceramic glass if pushed across the surface. • Objects that melt and things that boil over can burn onto the ceramic glass and should be removed straightaway.
Control panel layout Heat setting selection Display On/Off Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields.
Residual heat indicator 1 Warning! Risk of burns from residual heat. 3 Residual heat can be used for melting and keeping food warm. After being switched off, the cooking zones need some time to cool down. Look at the . residual heat indicator Operating the appliance Switching the appliance on and off Control panel Display Switch on Touch for 2 seconds / Switch off Touch for 1 second / none 3 After switching on, within approx.
Switching off the child safety device Step 1. Control panel Display/Signal Switch on appliance (Do not set a heat setting). 2. Touch of both the cooking zones at the front simultaneously for 4 seconds. 3. Switch appliance off. The child safety device is switched off. 3 The child safety device can only be switched on and off, if no heat setting is set.
Cooking zones • If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. _ is displayed. Before being used again, the cooking zone must be set to . Heat setting Switches off after 1 - 2 6 hours 3 - 4 5 hours 5 4 hours 6 - 9 1.
Examples of cooking applications The information given in the following table is for guidance only. Heat setting Cooking process 0 suitable for Cook time Tips/Hints Residual heat setting, Off position Keeping food warm Keeping cooked foods warm as required Cover Melting Hollandaise sauce, melting butter, chocolate, gelatine 5-25 mins. Stir occasionally Solidifying Fluffy omelettes, baked eggs 10-40 mins.
Cleaning and care 1 Take care! Risk of burns from residual heat. 1 Important Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Removing deposits 1. Place the scraper on the glass ceramic surface at an angle. 2. Remove residues by sliding the blade over the surface. 3.
What to do if … Problem Possible cause Remedy The cooking zones will not switch on More than 10 seconds have passed Switch the appliance on again. or are not functioning since the appliance was switched on The child safety device is switched on Deactivate the child safety device (See the section “Child safety device”) Several sensor fields were touched at the same time Only touch one sensor field Automatic switch off has been triggered Remove any objects (pan, cloths, etc.
Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. 2 Old appliance W The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Instructions 1 Safety instructions Warning! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Electrical Connection Diagram For UK only: 230V...
Assembly 15
Rating Plate TBC 651 X 55HAD54AO 949 593 046 230 V 50 Hz 6,5 kW TRICITY BENDIX 18
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
www.electrolux.com www.tricity-bendix.co.
