ELECTRIC COOKER SIE 233 GB
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings. These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
CONTENTS Instructions for the Installer Tehnical features 5 Installation 6 Location 6 Electrical connections 7 Instructions for the User Use and care 8 Before the first use of the oven 9 Electric oven - Oven function control knob - Thermostat control knob 10 10 10 Using the fan oven 11 Grilling 12 Electric hotplates 13 Hints and tips 14 Maintenance and cleaning 16 Oven bulb replacement 17 Something Not Working 18 Service and spare parts 19 Guarantee Conditions 20 How to read
INSTRUCTIONS FOR THE INSTALLER TECHNICAL FEATURES Dimensions Height Width Depth Oven Capacity Hob Front left Back left Front right Back right Total hob rating Oven Grill element Convection fan Circular heating element Light in the oven Cleaning 900 mm 500 mm 600 mm 45 l Hob element Ø 180 mm Hob element Ø 145 mm Hob element Ø 145 mm Hob element Ø 180 mm 2000 - 2090 W 1000 - 1050 W 1000 - 1050 W 1500 - 1570 W 5500 - 5760 W 1825 - 1900 W 35 W 1825 - 1900 W Lamp 25W type E14 manual Total oven rating 18
INSTALLATION This cooker must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par.2 and B.S. 6891 Current Editions. Before your appliance is connected to the mains electricity supply, check to ensure that the voltage and the frequency shown on the rating plate corresponds with your supply voltage. This appliance must be earthed.
ELECTRICAL CONNECTIONS Any electrical work required to install this hob and the supply cable should be carried out by a qualified electrician or competent person, in accordance with the current regulations. NOTE: The earth wire should be about 2 cm longer than the live and neutral wires. THIS COOKER MUST BE EARTHED. After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 50°C above the ambient temperature.
INSTRUCTIONS FOR THE USER USE AND CARE A A. B. C. D. E. F. G. H. Hob with electric plates Control panel Shelf supports Shelf Door handle Oven door Drawer Adjustable feet B C D E F G H CONTROL PANEL BACK LEFT 1 1. 2. 3. 4. 8 FRONT LEFT FRONT RIGHT BACK RIGHT 2 3 4 Back left hotplate control knob Front left hotplate control knob Front right hotplate control knob Back right hotplate control knob TEMPERATURE 5 6 7 5. 6. 7. 8.
USE OF APPLIANCE Before the First Use of the Oven Before the first use ensure that the room is well ventilated: V.M.C. (Mechanic ventilation) or opened window. Remove all packaging, both inside and outside the oven, before using the oven. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Remove the oven accessories. 2. Remove any adhesive labels or protective films, if there are any. 3.
ELECTRIC OVEN Oven Function Control Knob 0 Oven switched off Oven light Defrost – (NB: This is NOT a cooking position). This position is intended to assist in thawing of frozen foods. Fan cooking – Thermaflow cooking; this system will allow you to roast and bake at the same time with very little flavour transference, and on any shelf. Grill - The grill cannot be used at the same time as the oven. The oven door must be closed when grilling.
USING THE FAN OVEN The Fan Oven The air inside the oven is heated by the element around the fan situated behind the back panel. The fan circulates hot air to maintain an even temperature inside the oven. The advantages of cooking with this function are: Faster Preheating Because the fan oven quickly reaches temperature, it is not usually necessary to preheat the oven although you may find that you need to allow an extra 5-7 minutes on cooking times.
Grilling When grilling, the accessible parts of the appliance are hot and the appliance should not be left unattended. Take care that children do not play near it. During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven. The grill pan will become hot during use, always use oven gloves when removing or replacing a hot grill pan. All grilling must be carried out with the oven door closed .
ELECTRIC HOTPLATES To switch on a hotplate, turn the relevant control knob to the required heat setting. The control knob is numbered 0 – 6 0 – OFF 1 – Minimum 6 – Maximum. The hob has two types of hotplates: Normal Hotplates We recommend the plates are switched to maximum (6) for a short while to boost the plate, and then adjusted to the required setting. Rapid Hotplate (Front left) The rapid hotplates indicated by a red spot, will heat up more quickly than a normal plate.
Hints and Tips Saucepans for use on solid hotplates should have several characteristics: • They should be fairty heavy duty. • They should fit the heat area exactly, or be slightly larger for efficient use, NEVER smaller. • They should have a flat base to ensure good contact with the hotplate. This is particularty important when using pans for high temperature frying presure cooking. As soon as liquid starts boiling, turn the hotplate control knob so that it will barely keep the liqiud simmering.
Accessories appliance delivered with the The following accessories are supplied with your appliance. • Shelf for placing dishes on . The dish should be put in the middle of the shelf to balance the weight. • A roasting tray with roasting grid on it. It is used to collect juice when cooking in it, place it on the shelf 2. If you do not use the roasting tray, remove it from the oven.
MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely. Before any maintenance or cleaning can be carried out, you must DISCONNECT the cooker from the electricity supply. When cooking is completed and the oven has cooled down, remove the filter by pushing the protruding tongue on the filter upward.
DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter. If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Centre who will be pleased to advise further. The Hob Top The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.
SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Service Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.
GUARANTEE CONDITIONS Standard Guarantee Conditions We Tricity Bendix undertake that if, within 12 months of the date of the purchase, this Tricity Bendix appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
