User Manual

11
OR
Power Cut
• Push the corresponding knob in completely
and turn it left to the symbol “large flame”
symbol and ignite with a match.
• Release the knob and watch that the burner
has ignited. Upon ignition, adjust the flame as
required.
• If for any reason the flame should extinguish
turn off the relevant control knob, leave for at
least one minute and then re-ignite.
Extinguishing of burners
Turn the knob clockwise to mark «
».
Do not put anything on the hob that is
liable to melt.
Selecting the Correct burner
Above every knob there is a symbol for the
corresponding burner.
For good cooking results, always choose pans,
which correctly fit to the diameter of the burner
used (see figs). Choose thick, flat bottom pots.
We recommend the flame is lowered as soon as
the liquid starts boiling.
For a correct ignition always keep the burner ring
and the spark plugs clean.
The following diameter pans can be used:
Diameter (mm)
Burner
Power
(kW)
min. max.
Rapid 2,60 165 260
Semi-
Rapid
2,00 140 220
Good use
Bad use
(Power waste)
Auxiliary 1,00 120 160
Accessories delivered with the
appliance
The following accessories are supplied with your
appliance.
• 1 trivet.
• a dripping pan / roasting tray with roasting
grid in it.
The dish has to be put in the middle of the shelf to
balance the weight.
• a grill deflector - must be used when using the
grill.
In addition to the accessories supplied we
recommend you only use heatproof dishes/pans
(according to the manufacturer’s instructions).