A Important Safety Information Installation * The oven must be installed according to the instructions supplied. Any electrical work must be undertaken by a qualified electrician/competent person. + This oven is heavy and care must be taken when moving it. Do not try to move the appliance by pulling the door handle. + Remove all packaging, both inside and outside the oven, before using the appliance. After installation, please dispose of the packaging with due regard to safety and the environment.
For the User Important safety information Description of the appliance Controls The Analogue Timer Before the First Use Using the Fan Oven Cooking Chart Defrosting Grilling Cleaning the Oven Contents Page Page Page Page Page Page Page Page Page Page ‘What happens if something goes wrong Page Service and Spare Parts Page Guarantee Conditions Offbeat After sales Service Addresses Guide to Use the instructions Page Page The following symbols will be found in the text to guide you throughout the Instructions: A
Description of the Appliance Oven Function Thermostat Analogue Thermostat Control Control timer Control Light Knob Knob Grill Element Oven Light n (] Fan 1 NI A = n L COCCI COHO 0 * 2 RN Rating Plate Removable handle Grill / Roasting pan Anti-tip shelf (x 2)
Controls Oven Function Control Knob {% Oven Light The oven light would be on without any heat. "é‘ Defrost Setting This setting is intended to assist in thawing of frozen food (see page 13). Grill — Ej gl Fan dusted cooking This allows you to roast or roast and bake simultaneously using any shelf, without flavor transference. {7} Grill The heat comes only from the top Fan element. Dusted — (& % _Defrosting . o g Cooking OFF o 50 Thermostat Control Knob .
The Analogue Timer The analogue timer can indicate the time of day, operable as a minute minder and automatically operate the oven. IS5 7O SET THE TIME OF DAY Pull knob B outwards and while turning it, set the time of day. U2 TO SET THE MINUTE MINDER Turn knob B until the duration time is displayed in 12 14 the left hand dial (maximum 180 min.). 11 | 2 Our diagram shows the timer set for 60 minutes. ’4/ When time is up, an alarm will sound and the left hand dial will be blank.
I3° TO SET THE TIMER TO SWITCH OFF ONLY This is useful if you want to begin cooking immediately but have the oven switch off automatically. 1. Set the oven function control knob and the thermostat control knob on the required settings. 2. Place food in the oven. 3. Turn knob B until the duration time is displayed in the left hand dial (maximum 180 min.}. Our diagram shows the timer set for 40 minutes. 4.
Before the First Use Remove all packaging, both inside and outside the oven, before using the appliance. Before first use, the oven should be heated without food. During this time, an unpleasant odor may be emitted. This is quite normal. = 1. Set the electronic timer to manual function. 2. Switch the oven function control knob to fan cooking 3. Set the thermostat control knob to MAX. 4. Open a window for ventilation. 5. Allow the oven to run empty for approximately 45 minutes.
The oven has four shelf levels, and is supplied with two anti-tip shelves. 1t is important that these shelves are correctly positioned as shown in the diagram. 5 How to Use the Fan Oven 1. Turn the oven function control knob to 2. Turn the thermostat control to the required temperature. THINGS TO NOTE + The oven light will come on when the oven function control knob is set. * The oven fan will operate continually during cooking.
Cooking Chart This chart is intended as a guide only. It may be necessary to increase or decrease the temperature to suit your individual requirements, Only experience will enable you to determine the correct setting for your personal requirements.
1 |Hints and Tips Runner positions are not critical, but make sure the shelves are evenly spread. When cooking more than one dish in the fan oven, place dishes centrally on the shelves rather than several dishes on one shelf. When the oven is full, you may need to allow slightly Longer cooking time. A shelf may be placed on the floor of the oven. Place dishes on a shelf in this position rather than on the oven base, to allow air circulation around the food. ‘When the oven is full of the same food, e.g.
Defrosting % ‘The oven fan operates without heat and circulates the air, at room temperature, inside the oven. This increases the speed of defrosting. However, please note that the temperature of the kitchen will influence the speed of defrosting. This function is particularly suitable for delicate food which could be damaged by heat, e.g. cream filled gateaux, iced cakes, pastries, bread and other yeast products. 5" How to Use Defrosting 1. Turn the oven function control knob to % .
Grilling Grilling must be carried out with the oven door closed. The grill pan handle must be removed from the pan. I M How to Use the Grill 1. Turn the oven control function knob on 7. 2. Turn the thermostat control knob to the required temperature. 3. Adjust the grid and grill pan runner position to allow for different thicknesses of food. Position the food close to the element for faster cooking and further away for more gentle cooking.
Cleaning the Oven Always switch off at the electricity supply before any cleaning. The oven should be kept clean at all times. A build-up of fats or other foodstuffs cold result in a fire, especially in the grill pan. Cleaning materials Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer, Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.
Oven Cavity The enameled oven cavity is best cleaned whilst the oven is still warm. ‘Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner. 1f the silage has become set, after the oven has cooled down, the following process will help to soften the splatters to help make cleaning easier. 55> 1. Place the grill/ meat pan on the oven shelf positioned in the lowest runner. 2.
Replacing The Oven Light If the oven bulb needs replacing, it must comply with the following specifications: Electric power: 15W, Electric rate: 220-240 V (50 Hz), ~ Resistant to temperatures of 300°C, Connection type: E14. These bulbs are available from your local Service Force Center. To replace the faulty bulb: 1. Ensure the oven is isolated from the electrical supply. 2. Push in and turn the glass cover anticlockwise. 3. Remove the faulty bulb and replace with the new one. 4. Refit the glass cover. 5.
If something goes wrong If the appliance is not working correctly, please carry out the following checks, before contacting your local Offbeat Service Force Center. SYMPTOM W The oven does not come on SOLUTION 4 Check the oven is in manual operation and that both a cooking function and temperature have been selected. 4 Check the appliance is wired in properly, and the socket switch or the switch from the mains supply to the oven are ON.
Service and Spare Parts If you require spare parts or an engineer contact your local Service Force Center by telephoning: 01990-929929 When booking a service call we will need to know the model number and date of purchase, together with your name, address, telephone number and a description of the fault. Customer Relations Department For general inquiries concerning your Offbeat appliance, contact our Customer Relations Department by letter or telephone as follows: Offbeat Customer Care Department PO.
Technical Data DIMENSIONS Height 580 mm. OF RECESS Width 560-570 mm. Depth 550 mm, DIMENSIONS Height 594 mm. OF PRODUCT Width 594 mm, Depth 559 mm. DIMENSIONS Height 320 mm. OF THE ‘Width 420 mm. OVEN CAVITY Depth 390 mm. Oven capacity ~ 53.2 liters Heating elements rating Oven element 25 kW Grill element 1.8 kW Convection Fan 30w Oven Light 15w Total Rating 2.
Installation A The oven must be installed according to the instructions supplied. Any electrical work ‘must be undertaken by a qualified electrician/competent person, in accordance with existing rules and regulations. 1t is dangerous to alter the specifications or modify the appliance in any way.
