Steam Iron Instruction Manual TIR2410
Important Safety Instructions Please follow all the precautions listed below for safety and to reduce the risk of fire, injury or electrical shock. Read all the instructions before operating the iron and keep them for future reference. If you pass the product on to a third party, include these instructions. Unplug the iron from the mains supply when not in use, and before emptying, filling, or cleaning. Do not touch the soleplate of the iron if it is hot. Always hold the appliance by the handle.
Features and controls G F H E I D K C B A M L Know Your Iron J MAX A: Soleplate B: Spray nozzles C: Filler cap D: Steam control E: Shot of steam button F: Spray button G: Power cord H: Safety sleeve I: Water reservoir J: Temperature knob K: Power light L: Self-Clean button M: Maximum filling level
Before You Start Preliminaries Unpacking Your Iron Unpack the iron carefully. If you dispose of the packaging, do so having regard to any recycling regulations in your area. The packaging contains: One Tricity Steam Iron One filler cup If any item is missing or damaged: please contact the Tesco store where you purchased the item, or your nearest Tesco store. Please have your receipt ready when you call. Important Special Features of Your Iron Soleplate: The soleplate of the iron is coated.
Basic Operation Fill carefully with fresh water using the supplied filler cup. Do not fill the iron above the MAX mark indicated on the side of the iron. Close the cap MAX Operation Ensure the mains socket is switched off at the wall and the Steam Control is OFF. Fill the iron with water as described above. Place the iron on its heel on the ironing board rest and connect the power cord to the wall socket. Switch on the power. The pilot light will illuminate. Select the correct temperature.
Advanced Operation Special Features Shot of Steam Button This feature may be used during steam or dry ironing but only when the iron is at highest settings. Press the Shot of Steam button to release a surge of steam. You may need to press the button a few times to prime the system. Wait a few seconds for the steam to penetrate the fabric before pressing the button again. Excessive use of this feature will cause the iron to cool, and the pilot light will illuminate.
Care, Cleaning and Storage When the iron is cool: Invert the iron, open the filler and pour away the excess water from the tank. When pouring away the water, gently shake the iron to remove any loose particles from the tank. Care and Cleaning Unplug the iron from the mains and allow it to cool down fully. Cleaning: To remove starch or other deposits from the soleplate, apply a small amount of mild cleaner to a damp cloth, forming a paste on the cloth. Gently rub the soleplate, then wipe with a moist cloth.
Storage When not in use the iron should be securely stored out of the reach of children. Store the iron on its heel. Do NOT store the iron on its soleplate or you may damage the finish. loosely loop the cord without kinking or straining it. Do not wrap the cord tightly around the body of the iron. After storage, always ensure the cord is fully unwound and and kinks are straightened out to prevent internal damage to the cord.
